. Desiccant Dryer

• Two regenerative desiccant columns effectively reduce moisture from saturation point to acceptable levels.
• The closed circuit, circulating hot and dry air through the material in a heat -insulated hopper, eliminates contamination of the dried material by moist air from the atomposhere.
• Single, energy-saving blower is easy to operate and maintain.
• A snake-cooler is provided to cool return air, which is necessary for absolute efficiency.
• The control-body and hopper are divided, which makes it convenient for operation and easy installation.
• Sew point, -40ºF
. conditions of sale .
 

. SPECIFICATIONS




 

 

 

 

 

THD-50EDS-MB
Controller Body		 Width mm(in) 820 (32.3)
Height mm(in) 1640 (64.6)
Depth mm(in) 550 (21.7)
Weight kg(lb) 280 (616)
TDS-50EDS-HP
Hopper		 Diameter
mm(in)		 520 (20.5)
Height
mm(in)		 1500 (59.1)
Weight
kg(lb)		 90 (198)
.
 .
Capacity kg(lb) 50 (110)
Heating Power
(kw)		 Drying Heater 4.2
Regeneration Heater 2.1
Air Flow
m3/min(Ft3/min)		 Dryer 1.25(CMM)
45(CFM)
Regeneration 0.3(CMM)
10.8(CFM)

 

 
. PLASTIC MACHINERY .................
 
 
. LOCATION .......................
321 Ambassador Drive Mississauga, Ontario
L5T 2J3 . Canada

ph . 905-564-8080
fax . 905-564-5003

email . jmcaloney@swrltd.com
map . view
. PRODUCT CATEGORIES .......